A brief overview on water damage restoration
Water damage restoration is a process of restoring the constructed area to its pre-loss condition. A property can be damaged due to overflow, flood or any other water damage event. The water damage restoration process involves various key elements such asassessing the loss, categorization the flood water based on its contamination levels, decontaminating and dehydrating the constructed area, monitoring the entire process of restoration and finally completing the process.
There are two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that set the standard operating procedure for water damage Cypress companies ought to abide for these standards. The Standard Operating Procedure (SOP) S500 acts as benchmark tool, which is used by the companies who are specialized in water damage restoration.
Loss Assessment and Categorization
Loss evaluation is the very first step of restoration process, which is also considered as one of the most significant steps in the entire process. The assessment has to be done perfectly to analyse the suitable response to be taken for restoration. While restoring the damage caused by water, technicians and the insurance companies work together to understand the severity of damage and to prepare claims for the same. One the other hand, technicians strategizes a planto launch the process of resetting the property. Identifying the source of damage, documentation, and accurate estimates are mandatory processed to be followed by every water damage Houston companies.
The flood water is categorized based on its contamination levels. The categories are listed below;
Category 1: Flooding is caused by the clean water and the source would bepipes, sinks and toilets that are free from faeces or urine.
Category 2: Flooding caused by the water that consists of contaminants and the source would be dishwasher, washing machine or toilet with urine.
Category 3: Flooding caused by category 3 is catastrophic and extreme care is taken while restoring the property. This water is highly unsanitary, which may kill a person if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are the sources. While treating a building flooded with category-3 water, technicians working at water damage Katy companies take extreme care by wearing recommended suits, googles and other accessories
Decontamination and Drying
Once the evaluation is done, drying and decontaminating processes are implemented. Based on the extent of damage and the damage caused by the flood water, restoration process is divided into four classes.
Class-1 damage: It is considered when the affected area is very small area and very less water has been absorbed by materials. It may be rectified through slow evaporation and is not considered as a serious damage.
Class-2 damage: When the damage is sustained by the entire room and carpet area.
Class-3 damage: When the whole constructed area is saturated with flood water
Class-4 damage: When the extreme saturation pockets are noticed
Decontamination and dehydrating the affected area is the most important stage in water damage restoration and equipmentsuch as blowers, dehumidifiers, scrubbers and subfloor drying equipmentare used. Decontamination process is extreme necessary if technicians notice contamination in the affected area.
Article’s Source: http://articles.org/a-brief-overview-on-water-damage-restoration/