Brake and clutch are the most important tools on an automobile. Modern cars are equipped with brakes on the front and rear sides. Brake helps you stop whereas clutch helps you go. Advanced clutches are delicate and of self-adjusting types. Both brakes and clutches must be of high quality, efficiency, durability standards and must be well maintained to ensure safety. There are many brake and clutch repairs workshops, where brakes and clutches can be tested, repaired or replaced if required.
Working Principle of a Braking System
The safety of a vehicle depends upon the smooth mechanism of the brake system. Provision of brakes is based on the principle that the movement of brake pads against rotating mass leads to the production of heat, which retards the vehicle. Brake pads or shoes are made of friction materials. When these moves against disc rotors or drums, the rotational energy changes into heat energy. Without a working brake, vehicle speed cannot be lowered.
What Causes Brake Failure?
Below safe thickness levels, heat is not dissipated properly. This increases chances of brake failure. If brake pads or shoes are fitted over old rotors, the chances of brake shudder are quite high. The old rotor causes microscopic undulations on its surface.
Brake parts and other brake components must be made of high quality material. The inbuilt techniques must be advanced. When the brake pads move against rotating parts, they get prone to wear and tear. As the thickness reduces the risk of brake failure increases. If the brake pads or shoes are getting thinner, such that thickness falls below safe levels, replacement is urgent.
Testing Systems for Brakes’ Efficiency
One must test if braking system is as good as new. The testing is done with the help of on-site brake lathing machine. This machine helps in the machining a rotor to remove the unwanted undulations. Consequent surfacing makes it look like a new one and helps avoid spending money on a new rotor or drum.
Another Testing System Is the Electronic Diagnosis of Anti-Lock Braking Systems (ABS).
The Maintenance and Repair Guidelines for A Braking System
To ensure safety while driving, the braking system must be maintained and repaired at regular intervals. Some important aspects of a braking system that must be taken care of are:
- Brake master cylinder repair
- Brake caliber Overhaul
In order to complete the process of professional brake repair, the following steps are taken.
- Cleaning a disc brake caliber
- Lubing disc brakes and other components of a braking system.
The Significance of a Clutch Action
Clutch helps run a scar smoothly and make it fuel efficient. The power is transmitted to the gearbox from the engine with the help of a clutch. Modern clutches are of self-adjusting types inclusive of heavy duty gearbox jacks. Like brakes, clutches must be replaced, if required for vehicle safety.
Advances in The Clutch Mechanism
Over the years, there have been many advances in automobile technology. Many user-friendly systems like clutch actuation components have been included in new automobile designs. By following proper guidelines, one can be assured that the new clutch will render smooth vehicular operation. The efficiency of vehicles will be higher than expected by the driver.
Guidelines for Clutch Repair
The frequency with which a clutch must be replaced or repaired depends upon the following factors:
- Driving style
- Oil leakages
The clutch replacement method must conform to manufacturers’ guidelines and model specifications.
Brake and clutch repairs are an important segment of automobile maintenance sector. Repair operations are required frequently if the automobile is to be used for heavy-duty operations like long drives or loading projects.
The workshop where maintenance operations like brake and clutch repairs are being carried out must be well equipped with sophisticated tools and equipment. The automobile repair technicians must be able to use such equipment to provide best quality service to the clients.