Prepping and Painting Millwork Cabinetry and Trim: Choosing Color and Showcasing Quality

You purchased custom interior millwork, and you love it. Every dovetail joint and seam fits together perfectly. The hardwood is of the highest quality, and the space of the room has been maximized through smart design. But when it comes time to paint, you want to be sure that the job that you do will enhance the quality of the craftsmanship below the paint. If you want to know how to paint interior millwork, then you’ve come to the right place. Painting interior millwork designs can enhance the beauty of your investment, and it can.

Prepping the Wood

Whenever you are painting, it is imperative that the surface is prepped. Whenever you are painting, make sure to lay drop cloths to ensure that the floor is protected. You will also need to sand the wood, if necessary, and prepare the wood with knotting solution if there are any knots that will have sap that will leak through. If you have wood that has been previously painted, you will need to either strip it or at least roughen it if it is high-gloss so that the new coat sticks. You will also need to apply a base coat.

Choosing Paint Color

When you choose a paint, there is an almost endless array of colors, and there are many ways to paint interior millwork designs. White, off-white, brown, and black are all classic colors for trim, and they can pop visually against the colors of your wall, showcasing the beauty of your millwork. White trim tends to look ultra clean while dark brown and black both ground a room. You can also choose to paint your woodwork the same color as the walls or only a couple of shades different for a soothing effect. Here are more design ideas on how to paint custom interior millwork.

Choosing Paint Type

But it’s not just the color that’s important when you are choosing a paint. Oil-based paint used to be the go-to for woodwork trim and cabinets, however, an application is more difficult than latex, it has a bad smell, and it can discolor and become brittle and crack over time. That’s why most people use latex today. It’s easier to apply and clean up when working, and the smell is much less pungent than it used to be.

Painting Clean Lines

Paint only looks fresh when the lines are clean. Most people use painter’s tape to avoid getting paint that they want on the trim onto the wall. Mask off the wall next to the trim that you will be painting, making sure that the tape is applied straight. If you find that the paint is bleeding through, there are a couple of things that you can double check. First of all, make sure that the tape is pressed firmly onto the wall. Using a putty knife can be helpful to firmly press down. You will also want to ensure that you aren’t using more paint than what is necessary, as this encourages bleeding.

Whenever you are painting millwork cabinetry or trim, there are both technical aspects to ensure that the quality of the work will enhance your custom millwork, and there are design tricks that enhance the aesthetic appeal. Whichever design and colors that you choose, make sure that the quality of the paint job enhances the quality of the woodwork. And, you never know, you might be so happy with your results that you’ll feel inspired to continue on with the walls and other parts of the house.